Explain various part of carnot's engine? explain the working of carnot engine?

Asked by Kashif | 8th Jan, 2013, 08:13: PM

Expert Answer:

In carnot's engine: an ideal gas taken in a cylinder. The bottom of the cylinder is diathermic, whereas the rest of it is adiabatic. An adiabatic piston is fitted into the cylinder. Also, suppose we have two large bodies, one at a constant high temperature T1 and the other at a lower temperature T2.

main parts:

1. working substance

2. heat reservoir

3. sink

We consider the standard Carnot-cycle machine, which can be thought of as having a piston moving within a cylinder, and having the following characteristics:


  • A perfect seal, so that no atoms escape from the working fluid as the piston moves to expand or compress it.


  • Perfect lubrication, so that there is no friction.


  • An ideal-gas for the working fluid.


  • Perfect thermal connection at any time either to one or to none of two reservoirs, which are at two different temperatures, with perfect thermal insulation isolating it from all other heat transfers.


  • The piston moves back and forth repeatedly, in a cycle of alternating "isothermal" and "adiabatic" expansions and compressions, according to the PV diagram shown below:


By definition, the isothermal segments (AB and CD) occur when there is perfect thermal contact between the working fluid and one of the reservoirs, so that whatever heat is needed to maintain constant temperature will flow into or out of the working fluid, from or to the reservoir.

By definition, the adiabatic segments (BC and DA) occur when there is perfect thermal insulation between the working fluid and the rest of the universe, including both reservoirs, thereby preventing the flow of any heat into or out of the working fluid.

The isothermal curves (but not the adiabatic curves) are hyperbolas, according to PV = nRT. The enclosed area (and therefore the mechanical work done) will depend on the two temperatures ("height") and on the amount of heat transferred, which depends in turn on the extent of the isothermal compression or expansion ("width"), during which heat must be transferred to maintain the constant temperature.

We will denote the heat transferred to or from the high-temperature reservoir (during the transition between points A and B) as Qh.

We will denote the heat transferred to or from the low-temperature reservoir (during the transition between points C and D) as Qc.

Answered by  | 9th Jan, 2013, 12:59: PM

Queries asked on Sunday & after 7pm from Monday to Saturday will be answered after 12pm the next working day.