an electric bulb is related220 V and 100 W when it is operated on 110 V the power consumed will be
Asked by kartik2811somvanshi | 22nd Jun, 2021, 08:44: AM
Resistance R and Power P are related as
P = V2 / R
where V is voltage
Hence Power is directly proportional to square of voltage but resistance will remain constant.
Hence when voltage is halved , power is reduced by a factor (1/4)
Hence power consumed by the bulb at 110 V is (100/4) = 25 W
Answered by Thiyagarajan K | 22nd Jun, 2021, 09:26: AM
- what is the power of torch bulb rated at 2.5V and 500 mA?
- The MCB of a Rupa’s room is tripped and keeps on tripping again and again. If it is a domestic circuit, what could be the reason of this phenomenon?
- a current
- if 20 C of charge pass a point in a circuit in 1 second what current is flowing
- A coil draws a current of 1.0 ampere and a power of 100 watt from an A.C. source of 110 volt and 5√22/π hertz. Find the inductance and resistance of the coil. Why can't I use P=VI here, and how can I determine when to use P=VI or P=I^2 R or P=V^2 / R
- Is on every consecutive point the electric potential or potential difference is different or same at all points except the ends of conductor
- what is potential difference?
- This is the question from class 10 light chapter asked in our state model paper
- In the following circuit the bulbis connected in parallel with switch and battery. the blub does not glow when the switch is closed but glows when the switch is open. Why?
Kindly Sign up for a personalised experience
- Ask Study Doubts
- Sample Papers
- Past Year Papers
- Textbook Solutions
Verify mobile number
Enter the OTP sent to your number